Product image for illustrative purposes only. Actual item may vary.
Schneider Electric BMX-MSP-0200
Schneider Electric BMXMSP0200 PTO module, 24VDC.
This Schneider Electric BMX-MSP-0200 is supplied brand new by PartLogic for machine control, process automation, industrial communication, equipment maintenance and replacement applications. It forms part of our Industrial automation > Plc controllers > Racks range and is referenced internally as PartLogic SKU PL26905690101.
Before ordering, please confirm the manufacturer part number, product specifications and compatibility with your existing equipment. If you are replacing a failed, obsolete or hard-to-find part, contact PartLogic and we can help check suitability or source related components.
Brand New - 12 Months Warranty
$768.30
(inc. GST)
In Stock
| Range of product | Modicon X80 |
| Product or component type | PTO module |
| Number of channels | 2 |
| Number of inputs | 4 |
| Discrete input type | Current sink yes origin input conforming to IEC 61131-2 type 3 | Current sink yes proximity input and limit switch input conforming to IEC 61131-2 type 3 | Current sink or source counter in position input conforming to IEC 61131-2 type 3 | Current sink or source drive ready, emergency input conforming to IEC 61131-2 type 3 |
| Input compatibility | 2-wire/3-wire proximity sensor 19.2…30 V conforming to IEC 947-5-2 |
| Output compatibility | Signal converter (USIC) | RS422, 7 mA input | Source input, 5 V to 24 V |
| Output frequency | 200 kHz <0.5 m with USIC and VW3M8210R05 | 100 kHz <5 m with the normal source input circuit | 200 kHz <10 m with the RS422 compatible circuits |
| Operating threshold | > 12 V no error supply voltage | > 8 V error supply voltage |
| Input voltage | 24 V DC |
| Input current | 4.3 mA |
| Voltage state 1 guaranteed | >= 11 V |
| Current consumption | 35 mA at 24 V DC preactuator | 150 mA at 3.3 V DC typical | 200 mA at 3.3 V DC maximum |
| Current state 1 guaranteed | >= 2 mA |
| Voltage state 0 guaranteed | 5 V |
| Current state 0 guaranteed | <= 1.5 mA |
| Response time | < 200 µs for position completed input and drive ready input | < 60 µs for origin input and proximity input |
| Number of outputs | 1 pulse output | 2 auxiliary output |
| Preactuator voltage detection threshold | < 8 V error preactuator voltage auxiliary output | < 8 V no error preactuator voltage auxiliary output | > 14 V error preactuator voltage pulse output | > 14 V no error preactuator voltage pulse output |
| Output voltage | 24 V DC |
| Output voltage limits | 19...30 V |
| Discrete output current | 50 mA |
| Current per channel | 0.4 A |
| Maximum leakage current | 0.05 mA at state 0 |
| [Ures] residual voltage | 0.15 V at state 1 |
| Response time on output | 1.2...1.5 ms on appearance | 1.2...1.5 ms on disappearance |
| Load impedance ohmic | 15000 Ohm |
| Output overload protection | By current limiter and electronic circuit breaker |
| Output short-circuit protection | By current limiter and electronic circuit breaker |
| Reverse polarity protection | By reverse mounting diode on output | Integrated on input |
| Insulation between channels | No insulated |
| Insul btwn prim and second | 1500 Vrms |
| Insulation resistance | > 10 MOhm |
| Local signalling | 1 LED (green) for module operating (RUN) | 1 LED (red) for external fault (I/O) | 1 LED (red) for internal fault, module failure (ERR) | 1 LED (green) for download (DL) | 8 LEDs (green) for channel status (CH00) | 8 LEDs (green) for channel status (CH01) |
| Electrical connection | 2 connectors with 28 pins |
| Module format | Standard |
| Product certifications | CE | UL | CSA | RCM | EAC | Merchant Navy | ATEX zone 2/22 | IECEx zone 2/22 |
| Ambient air temperature for operation | -25…70 °C |
| Derating factor | Without |
| Directives | 2014/35/EU - low voltage directive | 2014/30/EU - electromagnetic compatibility | 2014/34/EU - ATEX directive |
| Standards | IEC 61131-2 | IEC 61010-2-201 | UL 61010-2-201 | CSA C22.2 No 61010-2-201 | IACS E10 | IEC 61000-6-5, interface type 1 and type 2 | IEC 61850-3, location G | IEC 60079-0 |
| Environmental characteristic | Hazardous location class I division 2 |
| Unit Type of Package 1 | PCE |
| Number of Units in Package 1 | 1 |
| Package 1 Height | 5.400 cm |
| Package 1 Width | 11.500 cm |
| Package 1 Length | 11.700 cm |
| Package 1 Weight | 147.000 g |
| Unit Type of Package 2 | S02 |
| Number of Units in Package 2 | 15 |
| Package 2 Height | 15.000 cm |
| Package 2 Width | 30.000 cm |
| Package 2 Length | 40.000 cm |
| Package 2 Weight | 2.527 kg |
Struggling to find what you're looking for?
Can’t find what you’re looking for? Get in touch — we can source it for you.